Our Nissan Skyline R35 is headed to SEMA

Here are some pictures before it gets truck freighted to Vegas.

Click Here for more pictures of the Nissan R35

KW Variant 3 coilover suspension for 2008 Infiniti

KW Variant 3 coilover suspension for 2008 Infiniti G37
KW suspensions announces their Variant 3 stainless steel constructed coilover for the 2008 Infiniti G37.

The KW suspensions coilover for the Infiniti G37 enables the owner to lower their vehicle 20-45mm on the front axles and 0-45mm on the rear axles and retains enough travel to handle maximum load and dynamic loads during driving. Adjustable (and independent reacting) rebound and compression damping allows a truly individual performance driving setup for those technically demanding drivers. Compression dampening adjustment is conducted in the low-speed range, while the high-speed set-up, so decisive for driving comfort, has been pre-set by KW engineers.

Important characteristics such as safety, quality and performance are all taken into consideration with each KW coilover design. Each vehicle application is specifically designed and engineered for a proper range of motion, min/max weight loads and min/max lowering. All these requirements are met while retaining it’s performance handling characteristics. Each KW coilover suspension is produced with unique stainless steel “inox-line” technology. The stainless steel construction internally and externally provides long term durability and corrosion resistance from the elements.

All KW coilovers pass stringent German TUV safety and quality testing standards. Each kit is sold TUV approved.

Part # 35286003
MSRP: $ TBA

EVOSPORT POWER PULLEY SYSTEM DELIVERS +15 HP & 13 FT-LBS TORQUE!

EVOSPORT POWER PULLEY SYSTEM DELIVERS +15 HP & 13 FT-LBS TORQUE!

Evosport is proud to announce the release of its highly anticipated evosport Power Pulley System for the Mercedes-Benz 63 AMG (M156 6.2L V8) engines. This currently includes the following models: C63, CLK63, E63, CLS63, SL63, CL63, S63, ML63 and R63 AMG.

Custom-designed and engineered, fully dampened underdrive crankshaft pulley damper. Uses continuously variable active damping technology for optimal damping in all RPM ranges. Lightweight design dramatically reduces rotating mass. Made of high grade T-6061 aluminum then black hard anodized to ensure stock OE look. Includes hardened steel hub with integrated Woodruff keyway, OE serpentine belt and modified crankshaft bolt. Installation instructions included.

:: Offered at a special introductory price. Contact Us at (858)693-3278 for more information or to place an order.

evo1 Power Package
:: Also available as part of our evo1 Power Package for the 63 AMG with ECU upgrade. Contact Us at (858)693-3278 for more information

AEM Mitsubishi Lancer Cold Air Intake

AEM has released it’s Cold Air Intake for the 2007-2009 Mitsubishi Lancer 2.0 (Non-Evolution, Manual Transmission).

The Lancer kit comes with a high-strength polypropylene inlet pipe that contours to the tight engine compartment of the Lancer. This inlet pipe leads to the wheel well where an aluminum MAF sensor adapter is located then followed by a 2.75×7-inch performance dryflow air filter.

Download this Press Release in it’s entirety here - AEM 21-679 PR

E90 6000K Headlights & Foglights. LED ANGEL EYES

Here's a shot of an E90 sedan with 6000K HID'S installed on the passenger side Headlights, Foglights and LED Angel Eyes vs the standard halogen bulb on drivers side. HUGE DIFFERENCE..

If anyone is interested, we are doing a combo special Fogs, Headlights & Angel Eyes. CALL FOR DETAILS. (858)693-3278

New Work Wheels!

New Release!!

All new WORK VS-FX. This is the latest addition to our VS Series. The VS-FX is a true 3 piece modular design, utilizing the latest casting technology and barrel forming. The new VS-FX design is classic, elegant, sophistication and timeless. The 10 spokes design offers great amount of strength and durability over long period of time, this is a style that will out survive many other wheel design on the market. VS-FX has wide range of 20" width and offsets. Three types of center disk for BBK or Maximum lip setup. Custom 5 Lugs bolt pattern options, this cover wide range of vehicles, from Japanese, European and Domestic vehicle applications. Three standard colors to choose from. Optional colors available. Each VS-FX include VS center cap and valve stem. For more detail on VS-FX, please contact us or any authorized WORK Wheels Dealers.

AEM Factory Rebate Program

AEM is helping you out this October with their first ever Factory Rebate Program. This program is aimed putting a few bucks back in the pocket of customers buying AEM products, and give the people selling AEM products a hand at closing the deal.

Rebate Program Info

From October 1st through October 31st AEM will rebate the consumer 10% of the purchase price of any AEM Product!

Rebate Instructions

Fill out and Mail completed rebate form, original proof of purchase (receipt) for AEM product(s) and the UPC from each package to the address below. Failure to complete this procedure will void your eligibility to receive this factory rebate. Incomplete forms will not be processed or returned.

Terms and Conditions

Customer must verify which AEM retailer the purchase was made from. Rebate offer good on AEM products only. Not valid with any other discount, coupon, offer, prior purchase, exchange or refund. Rebate is NOT redeemable for cash. Offer valid from 10-01-2008 through 10-31-2008. Rebate value will be 10% of AEM Product purchase price only and will not include shipping, handling or taxes. Rebate submission must be submitted within 30 days of the end of this promotion to be redeemable. AEM reserves the right to cancel this REBATE OFFER at anytime, for any reason.

• For more information; checkout the AEM Factory Rebate Program

San diego Cars N Coffee

Group 5 Motorsport is going to have a section reserved for our cars/customer cars/and anyone who would like to support us at the upcoming cars and coffee on Sunday 10-19-08 at 7:30am

"Cars and Coffee San Diego"
Hosted by Modern Image,Group 5 Motorsport,and Bumper Doc



Who: SDAM, Modern Image,Group 5 Motorsport
Where: Miramar Speed Circuit (View Map)
When: 7:30Am - 10:00Am
Why: To form our own monthly meet and greet (I.e.. Cars and Coffee)


Come and enjoy breakfast at the park. Bring your ride. If it runs, bring it! We are asking all car enthusiasts to come and celebrate the first Meet & Greet at our own San Diego breakfast club for car lovers.

Breakfast sandwiches, coffee, juice, and donuts will be served. Donations and sponsorships will be accepted to keep this breakfast going for many years to come.
Free raffles!Win detail products from Adams Polishes. Modern Image Gift certificates! Use for car graphics or clear bra purchases. Free yearly passes the auto Museum. Free ride simulator rides! And more….


Here are few of the car clubs and vendors that will be attending.

Group 5 Motorsport
BangaStang (after market mustang parts)
Calipers Covers
So Cal Euro
Corvette club SD/Poway Div
Audi
Ferrari
Porsche
Honda
Subaru
H2hybrids water fueled vehicle and more....

We will be actively raising awareness to various organizations such - Veterans Affair, Homeless foundation, VOA (Volunteers of America) battered women and children program.
Foundation for missing and exploited children.
Diabetes Foundation
And more…….With your help we can make San Diego a better place to live and raise our children.

DNA Basic pedals NOW AVAILABLE!

DNA Basic pedals are now available

The genetics of the DNA pedal set have proven to be extrememly popular. Now they are available in a completely rubber coated version. This new blacked-out version has the yellow MOMO logo in the same rubber for a high-contrast look.

The DNA Basic pedals are now available for immediate shipping. Place your orders now!

DNB1111 DNA BASIC PEDAL SET, MANUAL, BLACK $80.00 MSRP

New Products!

Group 5 is now an authorized Race Precision inc dealer

After buying a bunch of Race Precision parts from another vendor we decided it was time to do a buy in with them
and start stocking some items. So the first batch of items we are stocking is the air inlet ducts.
They offer them for many applications..
-BMW E60 M5- 10-15hp @70mph
-BMW E63 M6- 16-22hp @70mph
-BMW Z4 M Coupe- 8-12hp @70mph
-BMW E90 335i- 8-15hp @70mph
-BMW E90/92 M3- 8-15hp @70mph
-and E63 mercedes-10hp and 11 lb torque

We have the 335i and new M3 kits in stock and will have the e60 M5 as well as the e63 mercedes kits in stock next.
Also anything we do not have we can get asap from Race precision so let us know what you need and we will get it for you.

New AC Schnitzer Digital Shift Knob

AC Schnitzer introduces a nifty upgrade to the interior of your manual transmission BMW interior. This cool gear shift knob, has a digital display reading that indicates the gear as it shifts. It fits many current and previous generation BMW and MINI models with manual transmission.

The digital shift knob is easy to read with its bright red display that is equipped with a light sensor designed to adjust brightness in various lighting conditions.

The new ACS shift knob installs quite seamlessly in just a few minutes. The display readings are triggered by position sensors that are wired to a companion power supply, other than that, no further wiring is required.

Limo Tint Anyone?

We had a brand new E92 M3 today. He decided that he wanted to go 5% tint all around. His wish was granted, and it turned out great. Let's hope he doesn't need to see at night.

BEFORE




AFTER